AC repair
Furnace & heating
Heat pumps
Ductless mini splits
Carrier
Trane
GoodmanSeasonal tune-up and full diagnostic on your Carrier, Trane, or Goodman system - readings shown to you before any repair is proposed
Diagnosis first, numbers second - you approve the repair price before a single part goes in.
Get your free estimateFast, Reliable AC Installation Across Murray
Murray homeowners call us when the old condenser finally quits, when a new build never cooled right, or when a replacement quote needs a second opinion. We handle AC installation across Murray with a written fixed price, a scheduled install date, and paperwork for any rebate you’re eligible for. We answer 24/7. Fast dispatch, 7am-7pm. Call (855) 473-8712.
Murray is a built-out Salt Lake Valley suburb, which changes the work. Nearly every install here is a replacement or a retrofit, not a new-construction drop-in. That means matching new equipment to ductwork that’s already in the walls, checking whether the old system’s shortfall was the unit or the return duct behind it, and getting the line set and drain right in a tight mechanical closet. Local knowledge matters more than a catalog. A house near the TRAX line on a narrow infill lot doesn’t take the same answer as a wide ranch lot off Vine Street.
We’re brand-agnostic on purpose. Our team covers Carrier, Trane, Lennox, Goodman, Rheem, York, Daikin, Bryant, and American Standard, so the recommendation follows your house and budget instead of a dealer program we’re tied to. Our technicians have up to 15 years of experience.
Why Murray Homeowners Call Lockhart AC Repair for AC Installation
We’re an HVAC company, and HVAC is the whole of what we do: AC installation, furnace repair, and furnace replacement. Not duct cleaning, not plumbing, not general handyman work. That focus is why Murray homeowners keep our number. When a furnace and an AC live in the same closet and share the same ductwork, one team that understands both is a real advantage, and it lets us tell you honestly whether a fix makes sense or a swap does.
Murray residents also live with something specific: the winter inversion layer over the Salt Lake Valley. On bad-air days you can see the smog sitting right over the city. That makes filtration and airflow a real part of the conversation here, not an upsell. A restrictive return doesn’t just starve the blower motor. It also limits the filter setup a system can carry. We’ll talk through that plainly.
We can work with your insurer where a claim is involved, and every job is quoted per job from a free written estimate. If your system is already in trouble rather than at the end of its run, AC repair in Murray typically runs $150 – $650, and that’s often the better call. We’ll say so when it is.
Styles & brands we work with
- AC repair
- Furnace & heating
- Heat pumps
- Ductless mini splits
- Carrier
- Trane
- Goodman
Central Air Conditioning Installation in Murray
Central Air Conditioning Installation in Murray is usually a replacement: pulling an aging condenser and coil, matching the new equipment to the house, and correcting whatever the last install got wrong. Most Murray work is swap-out, not new build, because the city’s housing stock is already built out. A typical central air install in Murray runs an estimated $3,500 – $7,500, and the written estimate sets the final price. What moves you up the range: a mismatched coil, tight closet clearances, new line sets, and duct corrections.
Sizing by load, not by square footage
Most of Murray’s newer inventory is infill and multifamily packed along State Street and the TRAX line on tight lots. Installers here routinely inherit builder-grade condensers and air handlers sized by square-footage rule of thumb rather than a load calculation. Overtons and undersized returns both show up. We check the actual room-by-room load before we quote tonnage, so the new unit fits the house and the ductwork, not a formula.
Returns, static pressure, and the rooms that never cool
In a newer Murray infill or multifamily unit, the first hot July usually shows up as one or two rooms that never catch up while the rest of the house cycles fine. That’s the tell of a rule-of-thumb tonnage match paired with a restrictive return and high static pressure. A qualified local pro confirms the shortfall with a load calculation, checks the evaporator coil and refrigerant charge, and usually corrects the ducting and blower motor settings before recommending a larger condenser.
This is where local expertise actually pays off. Adding a bigger condenser to a duct system that can’t move the air makes the problem worse and costs more to run. We’d rather fix the return and balance the rooms than sell tonnage you don’t need. For the full scope of what we install, see our AC installation services.
Furnace Installation in Murray
Furnace Installation in Murray is built around the same problem: 1950s-1980s ranch and split-level homes with original or once-replaced forced-air gas furnaces, and a limited mechanical closet or attic space to fit new high-efficiency equipment into. A typical furnace install in Murray is an estimated $3,500 – $7,500. What affects it: venting changes for high-efficiency models, closet and plenum clearances, and whether the duct system needs correction while the equipment is out.
Because we handle both furnace replacement and AC installation, we can be honest about sequence. If the AC and furnace share a closet and one is near the end of its run, replacing both at once usually costs less than two separate visits. If only the furnace is failing, we’ll say that too. Furnace repair runs an estimated $150 – $700, and a tune-up runs $80 – $200.
Why Murray winters are hard on equipment
Murray sits in the Salt Lake Valley, which traps cold air in winter temperature inversions. Furnaces run hard for long stretches, and they run in conditions where the exhaust and combustion air matter more than they would on a hilltop. That’s a real reason to look closely at venting and combustion air when a furnace is replaced rather than reusing the old setup.
Efficiency codes and what they changed
Homes built before modern efficiency codes often have ductwork and closets sized for older equipment. Retrofitting a high-efficiency furnace into that space usually means adjusting the plenum or the flue routing. We check the fit before quoting, so the install date doesn’t turn into a surprise.
Trusted Brands We Service in Murray
Nine brands, one team. We work on Carrier, Trane, Lennox, Goodman, Rheem, York, Daikin, Bryant, and American Standard across Murray. Whatever brand is in your home, we know it. That breadth means you don’t get the dead-end answer of “we don’t service that brand” when your builder put in a Goodman air handler or a Bryant condenser. We don’t stock parts on a truck, so if a specific component is needed we order it and schedule the work around it. The turnaround stays quick because the diagnosis is done right the first time and the part is ordered correctly. Brand-neutral also means the replacement recommendation follows your house, not a manufacturer relationship.
Common AC Installation Problems We See in Murray Homes
- Builder-grade condensers sized by square footage. In newer Murray infill and multifamily units, the equipment was matched by rule of thumb rather than a load calculation, so the back bedrooms stay hot through July and August while the front of the house cycles normally.
- Undersized or restrictive return ductwork. Tight lots and cramped mechanical spaces drive high static pressure, which starves the blower motor and shortens equipment life. It’s one of the most common things we correct during an install.
- Unregistered builder equipment. When the warranty registration got lost in the closing file, the manufacturer’s parts coverage is void, and a failed compressor or capacitor becomes an out-of-pocket repair. We check registration status before quoting replacement.
- Cramped coil-and-plenum retrofits in ranch and split-level homes. Limited closet and attic space in Murray’s older homes forces tight fits that hurt airflow. Correcting the clearance at install time keeps the system running at its rated capacity.
See the difference
Before
After
Before
After
Before
AfterPricing for AC Installation in Murray, UT
A typical AC installation in Murray is an estimated $3,500 – $7,500. The written estimate sets the final price, and the estimate itself is free. Here’s how the ranges break down by job type:
| Service | Typical estimated range in Murray |
|---|---|
| AC Installation | $3,500 – $7,500 |
| Furnace Installation | $3,500 – $7,500 |
| AC Repair | $150 – $650 |
| Tune-Up | $80 – $200 |
What pushes a Murray install toward the top of the range: a mismatched coil and air handler, a line set replacement, duct corrections for a restrictive return, and the closet or attic clearances common in Murray’s ranch and split-level homes. What keeps it lower: a straightforward swap where the existing ductwork is sound and the equipment matches the load. We’ll walk you through the line items before you commit, and we won’t recommend a bigger unit than the house can actually use.
We Also Serve Cities Near Murray
Murray sits in the middle of the Salt Lake Valley, so we cover the neighbors too. If you’re in Midvale, Holladay, Salt Lake City, or Sandy, the same team handles your install. Our Murray service area work runs alongside those cities, which means a technician familiar with valley ductwork and Salt Lake Valley climate conditions is close by. Same free written estimate, same fixed install date.
Serving Murray, UT – Our Local Coverage Area
We serve Murray and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs About AC Installation in Murray
Probably yes, or the return duct is too restrictive for the equipment that was installed. Builder-grade systems are often matched by square footage instead of a room-by-room load calculation, and the first hot July exposes it as one or two rooms that never catch up. A load calculation and a static pressure check confirm which problem you have, and the fix is often ducting and blower settings rather than a larger condenser. Call (855) 473-8712 for a free estimate.
Often no. Manufacturer parts warranties usually require registration within a set window after install, and when that paperwork is buried in the closing file the coverage can be void. That means a failed compressor or capacitor becomes an out-of-pocket repair instead of a covered one. We verify registration status and coverage limits before quoting any replacement. Call (855) 473-8712 and we’ll help you check.
SEER2 is the current efficiency standard, and newer equipment is rated on it rather than the older SEER scale. The test conditions changed, so the numbers aren’t directly interchangeable, which is why an installer quoting SEER2 can look like they’re quoting a lower rating. What matters for a Murray home is the load calculation and the ductwork, not the label alone. Call (855) 473-8712 for a quote you can compare line by line.
It can be, especially if you’re replacing both a furnace and an AC at once. A heat pump handles cooling and heating from one unit, which suits Murray’s hard summer cooling season and its cold inversion winters. Whether it makes financial sense depends on your existing ductwork, your electrical setup, and how long you plan to stay. We quote both options side by side so you can decide. Call (855) 473-8712 for a free estimate.
Yes, if it’s caught during a tune-up or a repair visit. A weak capacitor makes the compressor work harder on every start, and the extra heat and amp draw is what eventually kills it. A tune-up in Murray runs an estimated $80 – $200, and a capacitor check is part of it. Catching it early turns a $150 – $650 repair into a small part swap. Call (855) 473-8712 to schedule.
Get Your Murray AC Installation Quoted
If your Murray home is heading into another summer with hot back bedrooms, or your condenser is old enough that a swap makes more sense than another repair, call us. We’ll do the load calculation, check the ductwork and warranty status, and give you a written fixed price with a set install date. Free estimates, upfront pricing, and one team for your AC and your furnace. Call (855) 473-8712. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Written by the team at Lockhart AC Repair.